Stub length at each device must not exceed 0. You gain high-performance streaming with extreme capacity, and a high level of reliability and availability for long-term storage. A power cord feature number, if applicable, should also be specified. No Minimum number of features: A current list of supported open system configurations is available from the following Web site:

Uploader: Zugami
Date Added: 28 May 2015
File Size: 59.71 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92258
Price: Free* [*Free Regsitration Required]

With an independent loader motor coupled with the positive pin retention, the tape threads with a higher level of reliability. A current list of supported open system configurations is available from the following Web site: They can be a cost-effective solution for backup, save-and-restore, ibm ultrium iii tape drive archiving functions as the entry point for the family of IBM Ultrium tape products. The part numbers for additional supplies are: The tape itself is an advanced metal particle tape developed to help provide durability and capacity.

Rrive specify codes listed above in the section Power Cords must be used.

Family +03 IBM TotalStorage Ultrium 3 LTO Tape Drive

No Charge Required feature: A list of compatible software is available from your IBM representative or at: Delivering performance and capacity for midrange to high-end storage. A SCSI differential terminator is included with each tape drive. A SCSI differential terminator is included with each cable. Adaptive ibm ultrium iii tape drive equalization – The drive automatically compensates for dynamic changes in readback signal response.

Customer replacement parts None. Use the features above to select a power cord feature that is needed. It is designed to provide greater capacity and ibm ultrium iii tape drive improved data transfer rate with the capability for data encryption and media partitioning with a 6 Gbps SAS interface connection.

This method uses the surface of the tape, rather than the edges, to control tape motion. The LTO-CM is used to hold information about that specific cartridge, the media in the cartridge, and the data on the media.

No Power Cords One of ibm ultrium iii tape drive following power cords must be selected: First, it helps improve performance if a subsequent append overwrites inm after the first filemark; second, write of multiple ibm ultrium iii tape drive typically indicates a point where an append operation rape occur after the first of these filemarks.

Dual stage 16 channel head actuator – designed to provide precision head alignment to help support higher track density and improved data integrity Independent tape loader and threader motors and positive pin retention – designed ibm ultrium iii tape drive help improve the reliability of loading and unloading a cartridge, and to retain the pin even if tension is dropped.

The power cord shipped with the is determined by the Country Code. IBM tape drives Delivering performance and capacity for midrange to ibm ultrium iii tape drive storage.

The LTO-CM is used to hold information about that specific cartridge, the media in the cartridge, and the data on the media. This feature has two advantages.

TotalStorage Tape Drive * GB, 80MBs, LTO, Ultrium 3

IBM’s patented “Scheme-Swapping” compression is designed to look ahead at incoming data, and determines the most efficient storage method either ALDC or pass-thru yape to help provide optimal data compression and increased data throughput. The Tape Drive Model L3H is an excellent choice if you use tape drives that require larger-capacity or higher-performance tape backup.

This ibm ultrium iii tape drive uses the surface of the tape, rather than the edges, to control tape motion.

Separate writing of multiple ibm ultrium iii tape drive – Separate writing of multiple filemarks is designed to cause any write command of two or more filemarks to cause a separate data set to be written containing all filemarks after ulrrium first. This reduces tape damage especially to the edges of the tape and tape debris, which comes from the damaged edges and can accumulate in the head area.

A power cord option number, if applicable, should be specified. High bandwidth servo system features a low-mass servo to help more drivee track servo bands and improve data throughput with damaged media in less-than-optimal shock and vibe ibm ultrium iii tape drive. Features and can be ordered only with the initial order.

IBM TotalStorage 3580 Tape Drive Model L33 incorporates IBM LTO Ultrium 3 tape drive technology

Dynamic amplitude asymmetry compensation: This external stand-alone or rack-mountable unit is the entry taape for the family of LTO Ultrium tape products. Although the Tape Drive provides the capability for excellent tape performance, other components of the system may limit the actual performance achieved. A specify code is not required.